Kevin Goodwin

See the question below regarding refrigerants and solvents in the Flint River. Is this anything your unit may be aware of?

Hi Kevin, The assessment methodology for the intakes is slightly different based on the three surface water supply types. There are approximately 55 Great Lakes intakes, 14 Great Lakes connecting channel intakes, and 8 inland river intakes. The Great Lakes (55) and connecting channels intakes (14) used the “Assessment Protocol for Great Lakes Sources” which was developed by a Region 5 states workgroup in August 2000. Your statement was correct on the two factors used to calculate sensitivity of each intake is length (L) of the intake pipeline and depth (D) of the intake structure. Sensitivity equals L x D as a unit less value. Sensitivity < 25k has a CAZ radius of 3000 feet, 25k — 125k with radius of 2000 feet, and >125k a radius of 1,000 feet. The other factors you mentioned contributing to the CAZ, as well potential contaminant sources, discharges, and water quality are taken into consideration with the Sensitivity analysis to determine an overall Susceptibility of the intake. The connecting channel intakes (approx. 14) from roughly Port Huron to Wyandotte also utilized a flow model analysis of the St. Clair — Detroit River Waterway. This program included MDEQ, USGS, USACE, USEPA, and DWSD. This helped to identify concerns in contaminant tracking and develop contingency plans. The inland river intakes (approx. 8) were watershed based assessments. In addition to the CAZ based on a Sensitivity analysis, these assessments identified buffers in the watershed upstream of the intake. These 300-foot buffers or susceptible areas were created along the shoreline of all drainages upstream of the intake. These were additional areas to identify potential risks or contaminant sources. | attached an example of a watershed based assessment for Blissfield. More source water assessment program information is available on our website at: 3675 3693---,00.html Also, we should meet to follow up on our water quality standards comparisons for our programs and proceed with the integration toolkit. | will be in Lansing tomorrow and again on February 18". Jason Berndt Environmental Quality Analyst Office of Drinking Water and Municipal Assistance Gaylord Field Office 547-284-6543 989-705-3420 | xxxEND_PAGE:deq03_b606_3718_4178_381

Hi Jason — Was going to give you a call this p.m. to discuss some CAZ ‘stuff’ — but looks like you’re out of the office. Until we can talk —| wanted to see if the description below (quoted), which is currently in our Assessment Methodology of the Integrated Report, is relevant to inland surface water intakes as well (e.g. Raisin River)? This language is worded relative to Great Lakes/Connecting Channels, but based on the GIS layer we have (which I’m told came from the drinking water program originally) it looks like a similar approach is applied inland perhaps. “For public water supply intakes that are located in the Great Lakes or connecting channels, a concept of a Critical Assessment Zone (CAZ) around each intake was developed based on a Sensitivity Factor calculated for each intake. The two attributes used to develop the Sensitivity Factor are the water depth above the intake structure and the perpendicular distance from shore or length of the intake pipeline. Other factors such as localized flow patterns, thermal effects, wind effects, lake bottom characteristics, benthic nepheloid layers, etc., may be used to complete the sensitivity analysis. A radius for the CAZ, ranging from 3,000 feet for the most sensitive intakes to 1,000 feet for the least sensitive intakes, is assigned based on the Sensitivity Factor. A shape with this radius is then drawn around the intake to illustrate the CAZ. If the CAZ intersects the shoreline, then the geographic extent of the assessment unit is determined on a case-by-case basis as the most influential 12-digit HUCs that are along the shoreline within the CAZ. For intakes that are located in open waters of the Great Lakes where the CAZ does not intersect the shoreline, the geographic extent of the assessment unit is 1.5 square miles.” That said, | seem to remember from a Source Water Protection standpoint that anything ‘upstream’ was considered? If so, I’m just trying to wrap my head around how that differs from a CAZ...(and if not, well...’m wrong, which is likely). It'd be helpful to chat if you have some time in the next day or so. Thanks... Kevin Goodwin Senior Aquatic Biologist Water Resources Division- DEQ 517-284-5552 (ph) 517-241-9003 (fx) xxxEND_PAGE:deq03_b606_3718_4178_382 Rennaker, Joanne (DEQ)

Yes, that is correct Kevin, ibis a part of the state-wide MI PCB TMDL. MARCY ANOLE Aquatic Biologist Water Resources Division Mi Department of Eavicoomental Quality Pes 597-335-7360; FAR: si7-373-0058

{ believe that is inclucled in the state-wide PCB TMDL currently being developed by a contract and managed by Sylvia Heaton/Marcy Knoll. Kevin Goodwin Senior Aquatic Biologist Water Resources Division DEQ xxxEND_PAGE:deq12_b215_0884_0886_2

Hi Kevin, Do you know who will be working on the PCB TMDL for the Flint River. It’s scheduled to be done in 2013. Stephanie Kammer DEQ-Water Resources Division Lansing District Office 517-335-6117 kammmersébmichigan doy xxxEND_PAGE:deq12_b215_0884_0886_3